Interesting

Oscilloscope Current Probe

Oscilloscope Current Probe


Oscilloscope current probes can enable oscilloscopes to measure current and thereby extend their use beyond just that of measuring voltage.

There may be many instances where a scope current probe can come in useful - anywhere that t is necessary to measure the current rather than the voltage. Sometimes the current can be measured by [lacing a small resistor inth e line and measuring the voltage across it, but this has its own drawbacks. The best option is to use a scope current probe as this will directly measure the current with less disturbance of the circuit.

Scope current probe format

The oscilloscope current probe is manufactured so that it can be clipped around a conductor. Normally there is a spring loaded clip that enables the scope probe to be swiftly clipped around the cable.

The hole in the probe that clips around the cable under test can be seen on the right of the main probe body.

Operation of a scope current probe

Current probes sense the current flowing through a conductor and convert it to a voltage that can be viewed and measured on an oscilloscope.

Sometimes using the maths functions on a scope along with a voltage measurement on another channel it is possible to measure power, as well as looking at the phase differences.


Watch the video: Single-Ended or Differential Probe? Take the Mystery Out of Oscilloscope Probing (October 2021).