Collections

Buy Ham Radio Dummy Loads

Buy Ham Radio Dummy Loads

Dummy loads are used within amateur radio to dissipate the power from a transmitter without radiating it. When testing the transmitter, setting it up or whatever, a dummy load will be particularly useful.

There is a good selection of dummy loads to buy, so it is possible to choose what is needed, whether it is a low of high power type. If the connector is not what is needed, then it is easy to buy an adapter that will provide the required interface.

* Can't see what you want - just enter a different description in the search box.

When selecting an dummy load to buy there are several points that may be of interest:

  • Frequency range: Dummy loads have a limited frequency band over which they can operate. Typically they will be able to operate down to DC, but the top limit is often limited by the inductance of the resistor. This will be indicated as the SWR that they exhibit at a certain frequency. Check the dummy load being bought can operate up to the frequencies being envisaged.
  • Power capability: It almost goes without saying that the power handling capability of the dummy load should be checked before buying. Check also whether the handling capability is continuous or for a short period only. Match its power handling capability to your requirements.
  • Size: Dummy loads that can handle higher power levels and those which can handle the power continuously will naturally be larger. They will also need air flow to enable them to cool. Before buying the dummy load, check the size is compatible with your requirements.
  • Connector: The most commonly used types of connector that will be found when buying an amateur radio dummy load will be UHF connectors (PL259 / SO239) or the N-type. Both of these can handle high levels of power. Often the UHF connector is not expected to be suitable for high frequencies, and it is often limited to around 300 MHz. If a good quality UHF connector is used, then operating at high frequencies should not be too much of an issue.

There are many different dummy loads that are available to buy for amateur radio and other applications. There is a good selection so it will be possible to choose one that fits the requirements well.



Watch the video: What is a dummy load in Ham Radio? (December 2021).